Quick Start Guide

Forerunner210QuickStartManual 5

It may take 30–60 seconds to locate
satellite signals.
1. If necessary, press  to view the
locating satellites page.
2. Go outdoors to an open area.
3. Wait while the Forerunner searches
for satellites.
Do not begin your activity until the
locating satellites page disappears.
The time of day is set automatically.


 If you do not have a heart rate
monitor, you can skip this task.
Wear the heart rate monitor directly on
your skin, just below your breastplate.
It should be snug enough to stay in
place during your run.
1. Connect the heart rate monitor
module
➊ to the strap.
➊
2. Wet the electrodes ➋ on the back
of the strap to create a strong
connection between your chest and
the transmitter.
: Some heart rate monitors have
a contact patch ➌ . Wet the contact
patch.
➋ ➋➌➍
3. Wrap the strap around your chest,
and connect the strap hook ➍ to the
loop.
The Garmin logo should be right-
side up.
4. Bring the device within range (3 m)
of the heart rate monitor.