RV FIXED DISPLAY Owner’s Manual
© 2020 Garmin Ltd. or its subsidiaries All rights reserved. Under the copyright laws, this manual may not be copied, in whole or in part, without the written consent of Garmin. Garmin reserves the right to change or improve its products and to make changes in the content of this manual without obligation to notify any person or organization of such changes or improvements. Go to www.garmin.com for current updates and supplemental information concerning the use of this product.
Table of Contents Introduction.....................................................................1 Device Overview ......................................................................... 1 Using the Touchscreen ............................................................... 1 Locking and Unlocking the Touchscreen .................................... 1 Tips and Shortcuts......................................................... 1 Garmin® Support Center...............................................
Introduction WARNING See the Important Safety and Product Information guide in the product box for product warnings and other important information. Not all features are available on all models. Automatic backlight sensor Recommended Startup Image Dimensions 2 microSD memory card slots ® For the best fit for the startup images, use an image that has the following dimensions, in pixels. Using the Touchscreen Tap the screen to select an item. Drag or swipe your finger across the screen to pan or scroll.
Digital Switching 2 From the media screen, select Source, and select the media source. NOTE: The Devices button only appears when more than one media device is connected to the network. NOTE: The Source button only appears for devices that support multiple media sources. Your RV Fixed Display device can be used to monitor and control circuits using anEmpirBus digital switching system or another compatible digital switching system. For example, you can control the interior lights in your RV.
Removing a Preset 1 From an applicable media screen, select Presets. 2 Select a preset from the list. 3 Select Remove Current Channel. Setting the Device Name 1 From the media screen, select Menu > Installation > Set Device Name. 2 Enter a device name. 3 Select Done. Updating the Media Player Software You can update the software on compatible connected stereos and accessories. 1 Go to www.fusionentertainment.com/marine, and download the software update onto a USB flash drive.
6 Wait several minutes while the software update process completes. The device returns to normal operation after the software update process is complete. Remove the memory card. 7 NOTE: If the memory card is removed before the device restarts fully, the software update is not complete. Cleaning the Screen NOTICE Cleaners containing ammonia will harm the anti-reflective coating. The device is coated with a special anti-reflective coating which is very sensitive to waxes and abrasive cleaners.
Index A AM 2 B background 1 backlight 1 system information 3 T touchscreen 1 U unit ID 3 unlocking, screen 1 updates, software 3 C circuits 2 color mode 1 D device, cleaning 4 digital switching 2 F factory settings 3 FM 2 G Garmin product support. See product support H help.
support.garmin.
