echo 100 Series ™ Owner’s Manual March 2014 190-01708-00_0B Printed in Taiwan
All rights reserved. Under the copyright laws, this manual may not be copied, in whole or in part, without the written consent of Garmin. Garmin reserves the right to change or improve its products and to make changes in the content of this manual without obligation to notify any person or organization of such changes or improvements. Go to www.garmin.com for current updates and supplemental information concerning the use of this product. Garmin® and the Garmin logo are trademarks of Garmin Ltd.
Table of Contents Introduction.................................................................... 1 Registering Your Device ............................................................ 1 Contacting Garmin Product Support .......................................... 1 Manual Conventions .................................................................. 1 Getting Started............................................................... 1 Keys ......................................................................
Introduction 2 Select an option: • If you have a 200/77 kHz, dual-beam transducer, select Dual Beam. • If you have a 200/50 kHz dual-frequency transducer, select Dual Frequency. • If you have a DownVü transducer, select DownVü. • If you have another type of transducer, select it from the list. NOTE: The echo 101 device supports 200 kHz only. WARNING See the Important Safety and Product Information guide in the product box for product warnings and other important information.
NOTE: To receive DownVü scanning sonar, you need a compatible chartplotter or fishfinder and a compatible transducer. DownVü high-frequency sonar provides a clearer picture below the boat, providing a more detailed representation of structures the boat is passing over. Traditional transducers emit a conical beam. The DownVü scanning sonar technology emits a narrow beam, similar to the shape of the beam in a copying machine. This beam provides a clearer, picture-like image of what is beneath the boat.
Battery: Sounds when the battery reaches a specified low voltage. Deep Water: Sounds when the water depth is deeper than the specified depth. Drift: Sounds when depth variations at your present location exceed the specified depth. Fish: Sounds when the device detects a suspended target. • sets the alarm to sound when fish of all sizes are detected. • sets the alarm to sound only when medium or large fish are detected. • sets the alarm to sound only when large fish are detected.
Index A alarms, sonar 2 B beeper 1 C contrast 1 D device cleaning 3 registration 1 display settings 1 DownVü 1 H help 1 K keys 1 power 1 L language 3 P pausing 2 power key 1 product registration 1 Q quick adjust 1 R registering the device 1 S settings 1 system information 3 software license agreement 3 sonar 1, 2 alarms 2 depth scale 2 DownVü 1 frequencies 1, 2 gain 2 noise 2 scroll speed 2 suspended targets 2 zoom 2 specifications 3 system information 3 T timeout 1 transducer 1 U units of measu
www.garmin.
