User manual

Going for a Track Run
Before you go for a track run, make sure you are running on a standard-shape, 400 m track.
You can use the track run activity to record your outdoor track data, including distance in meters and lap splits.
1 Stand on the outdoor track.
2 Select START > Track Run.
3 Wait while the device locates satellites.
4 If you are running in lane 1, skip to step 10.
5 Hold MENU.
6 Select the activity settings.
7 Select Lane Number.
8 Select a lane number.
9 Select BACK twice to return to the activity timer.
10 Select START.
11 Run around the track.
After you run 3 laps, your device records the track dimensions and calibrates your track distance.
12 After you complete your run, select STOP > Save.
Tips for Recording a Track Run
• Wait until the GPS status indicator turns green before starting a track run.
• During your first run on an unfamiliar track, run for a minimum of 3 laps to calibrate your track distance.
You should run slightly past your starting point to complete the lap.
• Run each lap in the same lane.
NOTE: The default Auto Lap
®
distance is 1600 m, or 4 laps around the track.
• If you are running in a lane other than lane 1, set the lane number in the activity settings.
Recording an Ultra Run Activity
1 From the watch face, press START.
2 Select Ultra Run.
3 Press START to start the activity timer.
4 Start running.
5 Press LAP to record a lap and start the rest timer.
NOTE: You can configure the Lap Key setting to record a lap and start the rest timer, start the rest timer only,
or record a lap only (Activities and App Settings, page 96).
6 When you are done resting, press LAP to resume running.
7 Press UP or DOWN to view additional data pages (optional).
8 After you complete your activity, press STOP, and select Save.
Viewing Your Ski Runs
Your device records the details of each downhill skiing or snowboarding run using the auto run feature. This
feature is turned on by default for downhill skiing and snowboarding. It automatically records new ski runs
based on your movement. The timer pauses when you stop moving downhill and when you are on a chairlift.
The timer remains paused during the chairlift ride. You can start moving downhill to restart the timer. You can
view run details from the paused screen or while the timer is running.
1 Start a skiing or snowboarding activity.
2 Hold MENU.
3 Select View Runs.
4 Press UP and DOWN to view details of your last run, your current run, and your total runs.
The run screens include time, distance traveled, maximum speed, average speed, and total descent.
30 Activities and Apps