User manual

Pairing Your Smartphone
To use the connected features on your watch, you must pair it directly through the Garmin Dive
™
app, instead of
from the Bluetooth
®
settings on your smartphone.
1 From the app store on your smartphone, install and open the Garmin Dive app.
2 Select an option to enable pairing mode on your watch:
• During the initial setup, select Yes when you are prompted to pair with your smartphone.
• If you previously skipped the pairing process, hold MENU, and select Pair Phone.
3 Select an option to add your watch to your account:
• If this is the first time you are pairing a device with the Garmin Dive app, follow the on-screen instructions.
• If you already paired another device with the Garmin Dive app, select Add > Devices, and follow the on-
screen instructions.
Charging the Device
WARNING
This device contains a lithium-ion battery. See the Important Safety and Product Information guide in the
product box for product warnings and other important information.
NOTICE
To prevent corrosion, thoroughly clean and dry the contacts and the surrounding area before charging or
connecting to a computer. Refer to the cleaning instructions (Device Care, page 120).
1 Pinch the sides of the charging clip.
2 Align the clip with the contacts on the back of the device, and release the clip.
3 Plug the USB cable into a USB charging port.
Product Updates
On your computer, install Garmin Express
™
(www.garmin.com/express). On your smartphone, install the Garmin
Dive app.
This provides easy access to these services for Garmin
®
devices:
• Software updates
• Map updates
• Course updates
• Data uploads to Garmin Dive
• Product registration
Setting Up Garmin Express
1 Connect the device to your computer using a USB cable.
2 Go to www.garmin.com/express.
3 Follow the on-screen instructions.
Introduction 5