User manual

Recording a Bouldering Activity
You can record routes during a bouldering activity. A route is a climbing path along a boulder or small rock
formation.
1 From the watch face, press START.
2 Select Bouldering.
3 Select a grading system.
NOTE: The next time you start a bouldering activity, the device uses this grading system. You can hold
MENU, select the activity settings, and select Grading System to change the system.
4 Select the difficulty level for the route.
5 Press START to start the route timer.
6 Start your first route.
7 Press LAP to finish the route.
8 Select an option:
• To save a successful route, select Completed.
• To save an unsuccessful route, select Attempted.
• To delete the route, select Discard.
The rest timer appears.
9 When you are done resting, press LAP to start your next route.
10 Repeat this process for each route until your activity is complete.
11 After your last route, press STOP to stop the route timer.
12 Select Save.
Starting an Expedition
You can use the Expedition app to prolong the battery life while recording a multi-day activity.
1 From the watch face, press START.
2 Select Expedition.
3 Press START to start the activity timer.
The device enters low power mode and collects GPS track points once an hour. To maximize battery life, the
device turns off all sensors and accessories, including the connection to your smartphone.
Recording a Track Point Manually
During an expedition, track points are recorded automatically based on the selected recording interval. You can
manually record a track point at any time.
1 During an expedition, press UP or DOWN to view the map page.
2 Press START.
3 Select Add Point.
Viewing Track Points
1 During an expedition, press UP or DOWN to view the map page.
2 Press START.
3 Select View Points.
4 Select a track point from the list.
5 Select an option:
• To start navigating to the track point, select Go To.
• To view detailed information about the track point, select Details.
Activities and Apps 21