User manual

Evaluating an Activity
Before you can evaluate an activity, you must enable the self-evaluation setting on your D2 Mach 1 device
(Activities and App Settings, page 32).
You can record how you felt during a run, bike, or swim activity.
1 After you complete an activity, select Save (Stopping an Activity, page 13).
2 Select a number that corresponds with your perceived effort.
NOTE: You can select to skip the self evaluation.
3 Select how you felt during the activity.
You can view evaluations in the Garmin Connect app.
Running
Going for a Track Run
Before you go for a track run, make sure you are running on a standard-shape, 400 m track.
You can use the track run activity to record your outdoor track data, including distance in meters and lap splits.
1 Stand on the outdoor track.
2 Select START > Track Run.
3 Wait while the device locates satellites.
4 If you are running in lane 1, skip to step 10.
5 Hold MENU.
6 Select the activity settings.
7 Select Lane Number.
8 Select a lane number.
9 Select BACK twice to return to the activity timer.
10 Select START.
11 Run around the track.
After you run 3 laps, your device records the track dimensions and calibrates your track distance.
12 After you complete your run, select STOP > Save.
Tips for Recording a Track Run
• Wait until the GPS status indicator turns green before starting a track run.
• During your first run on an unfamiliar track, run for a minimum of 3 laps to calibrate your track distance.
You should run slightly past your starting point to complete the lap.
• Run each lap in the same lane.
NOTE: The default Auto Lap
®
distance is 1600 m, or 4 laps around the track.
• If you are running in a lane other than lane 1, set the lane number in the activity settings.
Going for a Virtual Run
You can pair your D2 Mach 1 device with a compatible third-party app to transmit pace, heart rate, or cadence
data.
1 Select START > Virtual Run.
2 On your tablet, laptop, or smartphone, open the Zwift
™
app or another virtual training app.
3 Follow the on-screen instructions to start a running activity and pair the devices.
4 Select START to start the activity timer.
5 After you complete your run, select STOP to stop the activity timer.
14 Activities and Apps