Cockpit Reference Guide

Garmin G1000 Cockpit Reference Guide for the Hawker Beechcraft C90A/GT
190-00664-00 Rev. A
6
Nav/Com/XPDR/Audio Panel
SELECTING A NAV RADIO
1) Press the CDI Softkey to select NAV1 (VOR1/LOC1) or NAV2 (VOR2/LOC2).
2) Pressing the NAV1 , NAV2 , DME , or ADF Key selects and deselects the
navigation radio audio source. All radio keys can be selected individually or
together.
NAV/COM TUNING
1) Press the small tuning knob to select the desired radio for tuning.
2) Turn the respective tuning knobs to enter the desired frequency into the
standby frequency field. The large knob enters MHz and the small knob
enters kHz.
3) Press the Frequency Transfer Key to place the frequency into the active
frequency field.
DIGITAL CLEARANCE RECORDER AND PLAYER
NOTE: Only the audio for the selected COM MIC Key is recorded. Audio is
not recorded for COM3 MIC.
Record
1) Press the REC Key to begin recording.
2) Press the REC Key again to stop recording.
Play
1) Press the PLAY Key once to play the latest recorded memory block.
2) Press the PLAY Key once while playing to stop.
3) Press the PLAY Key twice quickly while playing to begin playing the
previously recorded block.
Each subsequent two presses will skip back to
the previously recorded block.