Airplane Flight Manual Supplement

Hawker Beechcraft C90A and C90GT King Air 190-00682-02 Rev. C
Page 62 of 95
7. Level airplane in ALT mode at MDA.............................. PRESS NAV button 200 ft above MDA
If airplane is descending via GP, GP will extinguish and PIT mode will be active and
airplane will capture MDA.
8. AFTER LEVELING AT MDA......................SET Missed Approach Altitude In Altitude Preselect
VOR APPROACH
1. Load the approach into the Active Flight Plan.................................... VERIFY the G1000 tunes
the proper VOR frequency
2. Approach Minimums............................................................................ SET ON TMR/REF page
IF Flying Vectors-To-Final
3. Airplane on Vectors-To-Final
a. Mode Control Panel ..................................................PRESS HDG to fly ATC radar vectors
b. PROC button on PFDs or MFD...................... SELECT ‘ACTIVATE VECTORS-TO-FINAL’
NOTE
SUSP may annunciate on the HSI when Vectors-To-Final is selected. The flight plan will
automatically unsuspend when the airplane intercepts and turns inbound on the final
approach course. When automatic flight plan waypoint sequencing resumes, SUSP will
extinguish.
c. HSI CDI.......................................................................PRESS until VOR navigation source
To be used for the approach displays
d. Course Pointer ...................................................................................Set to inbound course
e. Mode Control Panel .........................................................PRESS APR, verify VAPP armed
IF Flying Full Approach Including Transition
3. Airplane cleared to an initial approach fix
a. ACTIVATE THE APPROACH from the PROC page,
Or
ACTIVATE a DIRECT TO ( D ) the IAF
b. HSI CDI........................................................................................SELECT GPS nav source
c. Mode Control Panel .................................................................... PRESS NAV (GPS mode)
NOTE
Ensure groundspeed is less than 200 KTS within 1 minute of the IAF
d. When Established Inbound to the FAF ................................................. PRESS CDI softkey
until VOR navigation source to be used for the approach displays
(Autopilot / Flight Director Mode will automatically change to ROL)
e. Course Pointer ...................................................................................Set to inbound course