Cockpit Reference Guide

Garmin G1000H
™
Cockpit Reference Guide for the Bell 407GX
190-01254-00 Rev. B
61
Hazard Avoidance
Flight
Instruments EICAS
Nav/Com/
XPDR/Audio AFCS GPS Nav
Flight
Planning Procedures
Hazard
Avoidance
Additional
Features
Abnormal
Operation
Annun/
Alerts Appendix Index
Weather Request
Status Message
Description
Auto requests inhibited
Send manual request to
reset.
The system has disabled automatic weather data requests due
to excessive errors. Automatic weather data requests have
stopped. Send a manual weather data request to resume
automatic updates.
Auto update retry: ##
Seconds
The system will attempt another automatic weather data
request after an error occurred during the previous request.
Timer counts down until the next automatic request occurs.
GFDS Comm Error [2] A communications error has occurred with the GIA. The system
should be serviced.
GFDS Comm Error [4] This occurs if multiple automatic weather data requests have
recently failed, or the GDL 59 or a GIA is off-line.
GFDS Comm Error [5] The Iridium or GFDS networks are not accessible. Check Iridium
signal strength. If this error persists, the G1000H should be
serviced.
GFDS Comm Error [6] A communications error has occurred. It this error persists, the
system should be serviced.
GFDS Comm Error [7] A weather data transfer has timed out. Check Iridium signal
strength and re-send the data request.
GFDS Comm Error [8] A server error has occurred or invalid data received.
GFDS Login Invalid There is a problem with the GFDS registration. Contact Garmin
Flight Data Services at 1-866-739-5687 in the United States or
913-397-8200, ext. 1135 for assistance.
GFDS Server Temporarily
Inop
The GFDS weather data server is temporarily out of service, but
is expected to return to service in less than 30 minutes.
GFDS Server Inop The GFDS weather data server will be out of service for at least
30 minutes.
Invalid Coverage Area The weather data request coverage area does not contain at
least one of the following: a waypoint, a flight plan, or a flight
plan destination. Verify at least one of the coverage options is
enabled (checked) and contains required criteria, then re-send
the data request.