Cockpit Reference Guide

Garmin G1000H
™
Cockpit Reference Guide for the Bell 407GX
190-01254-00 Rev. B
2
Flight Instruments
Flight
InstrumentsEICAS
Nav/Com/
XPDR/AudioAFCSGPS Nav
Flight
PlanningProcedures
Hazard
Avoidance
Additional
Features
Abnormal
Operation
Annun/
AlertsAppendixIndex
ENABLE/DISABLE OBS MODE WHILE NAVIGATING WITH GPS
1) Press the OBS Softkey to select OBS Mode.
2) Turn a CRS Knob to select the desired course to/from the waypoint. Press a
CRS Knob to synchronize the Selected Course with the bearing to the next
waypoint.
3) Press the OBS Softkey again to disable OBS Mode.
ENABLE HEADING PRESET MODE
1) Press the SET HDG Softkey on the PFD. The system is in Heading Preset
Mode (HPM) as indicated by displaying ‘SET’ to the left of the heading
value.
2) Press the HDG + and/or HDG - Softkeys to slew the heading value to the
desired setting.
Or :
Set the Selected Heading Bug to the desired heading value, then press the
HDG SYNC Softkey.
DISABLE HEADING PRESET MODE
Press the HPM OFF Softkey on the PFD to manually disable Heading Preset
Mode.
Or :
Heading Preset Mode automatically disables after eight minutes.
If there is more than 10° difference between the Heading Preset value and the
magnetic heading when Heading Preset Mode is disabled, the heading value is
displayed in yellow and ‘ALN’ will be displayed to the left of the heading. When the
magnetic heading has properly aligned, the heading value will be displayed in white
and ‘ALN’ will no longer be displayed.