BC 50 ™ Owner’s Manual
© 2022 Garmin Ltd. or its subsidiaries All rights reserved. Under the copyright laws, this manual may not be copied, in whole or in part, without the written consent of Garmin. Garmin reserves the right to change or improve its products and to make changes in the content of this manual without obligation to notify any person or organization of such changes or improvements. Go to www.garmin.com for current updates and supplemental information concerning the use of this product.
Table of Contents Introduction......................................1 Viewing the Backup Camera............. 1 Pairing a BC 50 Camera with a Garmin® Navigation Device.............. 1 Guidance Lines................................. 2 Multiple Cameras............................. 3 Specifications..................................
Introduction WARNING See the Important Safety and Product Information guide in the product box for product warnings and other important information. Viewing the Backup Camera WARNING This device is intended to enhance your situational awareness when used properly. If used improperly, you could become distracted by the display, which could lead to an accident causing serious personal injury or death. Only access the information displayed on the device with a glance.
Guidance Lines WARNING The guidance lines feature is intended for informational and reference purposes only. You are responsible for maintaining awareness of your surroundings. Failure to do so could result in an accident or collision, resulting in death, serious injury, or property damage. Guidance lines provide an approximate visual representation of the vehicle's path when in reverse. To provide the most accurate reference, you must align the guidance lines for each backup camera.
3 Drag the circles on the corners of the guidance lines , or tap the arrows until they match the angle and position of the curb, driveway, or parking stall lines. The guidance lines should appear directly on top of your reference points. The red or orange section of the guidance lines should align with the rear of your vehicle. 4 If necessary, reposition the vehicle with the other side closely aligned to a curb, driveway, or parking stall lines, and repeat the alignment process.
Renaming a Camera You can change the name that appears above a camera in the camera view. You should use a descriptive name that clearly identifies the location of the camera. 1 From the camera screen, select an option: • Select > Rename. • Tap the screen, and select > Rename Camera. 2 Enter a camera name. 3 Select Done or OK. Removing a Paired Camera If you have already paired 4 cameras with your device, you must remove a paired camera before you can pair a new one.
support.garmin.
