nüvi 3700 series ® quick start manual for use with these nüvi models: 3750, 3760, 3790 March 2011 190-01157-01 Rev.
Getting Started Power Cables The device comes with two cables. ‹ WARNING Each connector fits in only the See the Important Safety and Product matching port. Information guide in the product • The vehicle power cable ➊ box for product warnings and other connects the mount to vehicle important information. power. The vehicle power cable When using your nüvi for the first has a right-angle connector. time, complete the following tasks. • The micro-USB cable ➋ connects the device to a computer. A “B” 1.
Mounting Your Device ‹ WARNING This product contains a lithium-ion battery. To prevent the possibility of personal injury or product damage caused by battery exposure to extreme heat, remove the device from the vehicle when exiting or store it out of direct sunlight. Notice Before mounting the device, see the Important Safety and Product Information guide for information about laws pertaining to windshield mounting. 1. Remove the clear plastic from the suction cup. 2.
Configuring your Device 1. Plug the vehicle power cable into the mount. 2. Plug the other end of the vehicle power cable into a power outlet in your vehicle. Your unit should turn on automatically if it is plugged in and the vehicle is running. 3. Follow the on-screen instructions. 4. If you are using a traffic receiver in Europe, connect the external antenna to the traffic receiver and secure it to the windshield using the suction cups.
Main Menu ➊ ➋ ➌ Finding Points of Interest ➍ ➎ ➏ ➐ ➑ ➒ ➊ ➋ ➌ ➍ ➎ ➏ ➐ ➑ ➒ GPS satellite strength. Touch to select a transportation mode. Touch to find a destination. Touch to view the map. Touch to stop a route. Touch to detour a route. Touch to make a call when connected to a compatible mobile phone. See www.garmin .com/bluetooth for information. Touch to adjust the volume. Touch to open the menu of tools and settings. nüvi 3700 Series Quick Start Manual 1.
Following Your Route Your route is marked with a magenta line on the map. If you depart from the original route, your device recalculates the route. A speed limit icon could appear as you travel on major roadways. ➋ ➊ ➌ ➏ ➐ ➑ ➍ ➎ ➊ T ouch to view the Next Turn ➋ ➌ ➍ 6 page. If a view of the junctions exists, the Junction View page appears. T ouch to view the Turn List page. Touch to zoom in and out. Touch to return to the Main menu. ➎ ➏ ➐ ➑ Touch to change the data field.
Taking a Detour Before you can take a detour, you must be navigating a route. 1. Touch to return to the Main menu. 2. Touch Detour. If the route you are currently taking is the only reasonable option, the device might not calculate a detour. Adjusting the Screen Brightness 1. Touch Tools > Settings > Display > Brightness. 2. Touch and move the scroll bar to adjust screen brightness.
walking. cityXplorer maps are not included with your device. Go to www.garmin.com to purchase cityXplorer maps. Changing Your Transportation Mode 1. From the Main menu, touch the transportation mode icon. 2. Select a mode, and touch Save. About Traffic The FM Traffic Message Channel (TMC) traffic receiver is included in some nüvi 3700 packages. It is built into the vehicle power cable.
3. Listen for the voice prompt and speak the name of the place. The device repeats the name of the place as it is searching. A list of locations appears. Tips for Using Voice 4. Speak the line number of the Command location you want. • Talk in a normal voice directed at the device to speak a command 5. Speak Yes to navigate to the exactly as it appears on the screen. location, or speak No to go back to the list of found locations. • Respond to voice prompts from the device as needed.
3. Touch the button below Bluetooth The internal microphone is in > Enabled > OK. the front of the device. Speak normally. 4. Touch the button below Phone. 5. Touch OK. About Sleep Mode 6. Select your phone, and touch OK. You can use sleep mode to conserve 7. Enter the Bluetooth PIN (1234) battery power when your device is for your device in your phone. not in use. Sleep mode uses very little power, and a battery charge lasts for Placing and Ending Calls weeks when your device is in sleep 1. Touch > Dial.
Registering Your Device 1. Go to http://my.garmin.com. 2. Follow the on-screen instructions to register your product. 3. Keep the original sales receipt, or a photocopy, in a safe place. Updating the Software 1. Connect the micro-USB cable to the micro-USB port on the device (page 2). If the AutoPlay menu does not open, or you are on a Mac® computer, go to www.garmin .com/agent. 4. Follow the on-screen instructions.
satellites while driving with your nüvi. For more information, go to www.garmin.com/numaps. More Information For more information about your device, select Tools > Help. You can download the latest version of the owner’s manual from www.garmin .com. For information on accessories, go to http://buy.garmin.com or contact your Garmin dealer. Contact Garmin Contact Garmin Product Support if you have any questions while using your nüvi device. In the USA, go to www.garmin.
