echo™ 100 and echo 150 owner’s manual
© 2011 Garmin Ltd. or its subsidiaries All rights reserved. Except as expressly provided herein, no part of this manual may be reproduced, copied, transmitted, disseminated, downloaded or stored in any storage medium, for any purpose without the express prior written consent of Garmin.
Introduction Introduction Warning See the Important Safety and Product Information guide in the product box for product warnings and other important information. This manual includes information for the echo™ 100 and echo 150 fishfinders. Manual Conventions Contacting Garmin Product Support Contact Garmin Product Support if you have any questions about this product. • In the USA, go to www.garmin.com/support, or contact Garmin USA by phone at (913) 397.8200 or (800) 800.1020.
Getting Started Getting Started Keys Configuring the Initial Device Settings Before you can use the device the first time, you must configure a series of initial settings. You must also configure these settings when restoring original factory settings. You can update each of these settings later. 1. 2. 3. 4. Select a language. Select the units in which to measure depth. Select the units in which to measure temperature. Select Done.
Getting Started Setting the Beeper You can set when the device makes audible sounds. 1. From the Sonar screen, select MENU > Setup > Alarms > Beeper. 2. Select an option: • To have the device beep when you select an item and when an alarm is triggered, select On. • To have the device beep only when alarms are triggered, select Alarms Only. Turning On the Device Automatically You can set the device to turn on when power is applied. Otherwise, press to turn on the device.
Using the echo 100 and echo 150 Using the echo 100 and echo 150 Sonar Screen The sonar screen shows a full-view graph of sonar readings from a transducer. The depth scale ➊ indicated on the right of the screen shows the screen depth as the screen scrolls from the right to the left, indicating suspended targets ➋. Bottom depth ➌, water temperature ➍ (if a temperature-capable transducer is connected), and transducer frequency ➎ are indicated on the left side of the screen.
Using the echo 100 and echo 150 Adjusting the Zoom on the Sonar Screen Automatically You can adjust the zoom of the Sonar screen by selecting the span of the view and locking the screen to the contour of the water bottom. For example, if you select a span of 10 meters, the device will display an area from the water bottom to 10 meters above the bottom. 1. From the Sonar screen, select Menu > Zoom > Auto. 2. Select the span you would like to show. 3. Select the starting depth.
Using the echo 100 and echo 150 Setting the Battery Voltage Alarm Selecting a Frequency for the echo 150 1. From the Sonar screen, select MENU > Setup > Alarms > Battery > On. 2. Select the low battery voltage that triggers the alarm. The alarm setting appears on the Alarms screen. Note: The echo 100 operates only at 200 kHz. You can set an alarm to sound when the battery reaches a specified low voltage. Setting Fish Alarms You can set an alarm to sound when the device detects a suspended target.
Appendix Appendix Specifications Specification Display Temperature Range Compass Safe Distance Frequency Power Source Voltage Range Fuse Freshwater Depth Saltwater Depth Viewing System Information From the Sonar screen, select MENU > Setup > System > System Information. Measurement 4 in. (102 mm) diagonal, 256 × 160 pixels, 8-level gray From 5°F to 158°F (from -15°C to 70°C) 10 in.
Appendix Software License Agreement BY USING THE ECHO 100 OR ECHO 150, YOU AGREE TO BE BOUND BY THE TERMS AND CONDITIONS OF THE FOLLOWING SOFTWARE LICENSE AGREEMENT. PLEASE READ THIS AGREEMENT CAREFULLY. Garmin Ltd. and its subsidiaries (“Garmin”) grant you a limited license to use the software embedded in this device (the “Software”) in binary executable form in the normal operation of the product.
© 2011 Garmin Ltd. or its subsidiaries Garmin International, Inc. 1200 East 151st Street, Olathe, Kansas 66062, USA Garmin (Europe) Ltd. Liberty House, Hounsdown Business Park, Southampton, Hampshire, SO40 9LR UK Garmin Corporation No. 68, Jangshu 2nd Road, Sijhih, Taipei County, Taiwan www.garmin.com January 2011 Part Number 190-01312-00 Rev.
