User Manual
Table Of Contents
- Table of Contents
- Introduction
- The Varia RCT715 and the Varia App
- The Varia RCT715 and Your Edge 1030 Series
- Other Compatible Devices
- Device Information
- Troubleshooting
- Resetting the Device
- Updating the Device Software With the Varia App
- Product Updates
- The radar device is not responding
- Radar detection does not work indoors
- The radar device does not turn on
- The status LED is flashing yellow
- The status LED turns red while charging
- The status LED turns red while updating the software
- The radar device disconnects from the Edge device
- The radar device disconnects from the Varia app
- Replacement Parts
- Getting More Information
Device Overview
Device button
Press to change device and light modes.
Hold for 1 second to turn the device on and enter active mode.
When the device is off, hold for 2 seconds to enter pairing mode (Pairing the Varia Radar
Device with Your Phone, page 7).
Hold for 2 seconds to turn the device off.
Device status LED
Changes color based on the battery level, pairing status, device modes, and charging
status (Varia RCT715 Device Status LED, page 5).
Camera status LED
Changes color based on the camera status (Varia RCT715 Camera Status LED, page 5).
Camera button
Hold for 1 second to save a video or take a picture.
Hold for 4 seconds to turn the camera off.
Microphone
Captures audio.
4 Introduction