User Manual
Table Of Contents
- Table of Contents
- Introduction
- The Varia RCT715 and the Varia App
- The Varia RCT715 and Your Edge 1030 Series
- Other Compatible Devices
- Device Information
- Troubleshooting
- Resetting the Device
- Updating the Device Software With the Varia App
- Product Updates
- The radar device is not responding
- Radar detection does not work indoors
- The radar device does not turn on
- The status LED is flashing yellow
- The status LED turns red while charging
- The status LED turns red while updating the software
- The radar device disconnects from the Edge device
- The radar device disconnects from the Varia app
- Replacement Parts
- Getting More Information
Installing the Tail Light Mount
1 Select a rubber pad based on your seat post shape, and place the rubber pad on the back of the tail light
mount.
2 Place the tail light mount on the seat post.
3 Attach the tail light mount securely using one band .
4 Align the tabs on the back of the device with the tail light mount notches .
5 Press the locking lever down until it locks into place.
Introduction 3