User Manual
Table Of Contents
- Table of Contents
- Introduction
- The Varia RCT715 and the Varia App
- The Varia RCT715 and Your Edge 1030 Series
- Other Compatible Devices
- Device Information
- Troubleshooting
- Resetting the Device
- Updating the Device Software With the Varia App
- Product Updates
- The radar device is not responding
- Radar detection does not work indoors
- The radar device does not turn on
- The status LED is flashing yellow
- The status LED turns red while charging
- The status LED turns red while updating the software
- The radar device disconnects from the Edge device
- The radar device disconnects from the Varia app
- Replacement Parts
- Getting More Information
Introduction
WARNING
See the Important Safety and Product Information guide in the product box for product warnings and other
important information.
The device can improve situational awareness. It is not a replacement for cyclist attentiveness and good
judgement. Always maintain awareness of your surroundings, and operate the bicycle in a safe manner. Failure
to do so could result in serious injury or death.
Always consult your physician before you begin or modify any exercise program.
Getting Started
You can use the Varia RCT715 with your compatible Garmin
®
device or a phone. This list provides an overview of
the installation and setup tasks.
• Charge the device (Charging the Device, page 15).
• Install the tail light mount (Installing the Tail Light Mount, page 3).
• If you are using an Edge
®
1030 series device, pair the devices (The Varia RCT715 and Your Edge 1030 Series,
page 10).
• If you are using your phone, download the Garmin Varia app to your phone, and pair the devices (Pairing the
Varia Radar Device with Your Phone, page 7).
• If you are using another Garmin device, pair the devices (Other Compatible Devices, page 13).
Tips for Installing the Device
The Varia RCT715 device includes a tail light and micro radar that can detect approaching vehicles up to 140
meters away.
• Select a secure location to mount the device where it does not interfere with the safe operation of your bike.
• Mount the device as high on the seat post as possible for optimal light visibility and radar detection.
NOTE: The mount surface should be vertical. The mounts are designed to accommodate most seat post
angles.
• Mount the device on the seat post 250 mm to 1200 mm above the road.
Introduction 1