User Manual
Table Of Contents
- Table of Contents
- Introduction
- The Varia RCT715 and the Varia App
- The Varia RCT715 and Your Edge 1030 Series
- Other Compatible Devices
- Device Information
- Troubleshooting
- Resetting the Device
- Updating the Device Software With the Varia App
- Product Updates
- The radar device is not responding
- Radar detection does not work indoors
- The radar device does not turn on
- The status LED is flashing yellow
- The status LED turns red while charging
- The status LED turns red while updating the software
- The radar device disconnects from the Edge device
- The radar device disconnects from the Varia app
- Replacement Parts
- Getting More Information
Replacing the Memory Card
You can replace the memory card to increase the storage capacity or to replace a card that has reached the end
of its useful life. The device requires an 8 to 128 GB microSD
®
memory card with a speed rating of Class 10 or
higher.
NOTE: A memory card is included so your device is ready to use out of the box. All memory cards have a limited
life and must be replaced periodically.
1 Open the cover .
2 Slide the card holder toward the mount, and lift up.
3 Pull open the card holder .
4 Insert the memory card into the memory card slot with the contacts facing the device.
Device Information 17