User Manual
Table Of Contents
- Table of Contents
- Introduction
- The Varia RCT715 and the Varia App
- The Varia RCT715 and Your Edge 1030 Series
- Other Compatible Devices
- Device Information
- Troubleshooting
- Resetting the Device
- Updating the Device Software With the Varia App
- Product Updates
- The radar device is not responding
- Radar detection does not work indoors
- The radar device does not turn on
- The status LED is flashing yellow
- The status LED turns red while charging
- The status LED turns red while updating the software
- The radar device disconnects from the Edge device
- The radar device disconnects from the Varia app
- Replacement Parts
- Getting More Information
Pairing the Radar Device with a Compatible Garmin Watch
This task is for the Forerunner
®
945, fēnix
®
7 series, Venu
®
2 series, and vívoactive
®
4 series watches. If your
watch is not listed, go to buy.garmin.com.
NOTE: Not all Varia RCT715 features are available on all compatible watches. See your watch owner's manual.
1 Bring the watch within range (3 m) of the sensor.
NOTE: Stay 10 m away from other ANT+ sensors while pairing.
2 Turn on the Garmin watch.
3 From the Settings menu, select Sensors > Add New > Search All.
4 While the Varia RCT715 device is turned off, hold the device button for 2 seconds to enter pairing mode.
The status LED flashes purple, and the tail light turns on. The device is in pairing mode for 5 minutes or until
you press the device button.
5 Select your sensor.
When the sensor is paired with your Garmin watch, the radar and bike light status icons appear solid.
14 Other Compatible Devices