User Manual
Table Of Contents
- Table of Contents
- Introduction
- The Varia RCT715 and the Varia App
- The Varia RCT715 and Your Edge 1030 Series
- Other Compatible Devices
- Device Information
- Troubleshooting
- Resetting the Device
- Updating the Device Software With the Varia App
- Product Updates
- The radar device is not responding
- Radar detection does not work indoors
- The radar device does not turn on
- The status LED is flashing yellow
- The status LED turns red while charging
- The status LED turns red while updating the software
- The radar device disconnects from the Edge device
- The radar device disconnects from the Varia app
- Replacement Parts
- Getting More Information
Viewing Radar on Your Edge Device
Go for a ride.
The radar information appears on the active data screen.
The vehicle position LED moves up the column as a vehicle gets closer to your bike. The threat level LED
changes color based on the potential level of threat. Green indicates no vehicle is detected. Amber
indicates a vehicle is approaching. Red indicates a vehicle is advancing at a high rate of speed.
Tone Alerts for Approaching Vehicles
The Edge device beeps if audible tones are turned on in the settings. Your device has alert tones for several
features. The alert tone for approaching vehicles has a unique sound. The device beeps one time when the first
vehicle is detected. After the threat is cleared, the device beeps again when another vehicle is detected.
The Varia RCT715 and Your Edge 1030 Series 11