User Manual
Table Of Contents
- Table of Contents
- Introduction
- Training
- Ride Data
- Device Information
- Other Compatible Devices
- Appendix
Entering the Crank Length with the Forerunner 945 and fēnix 6 Series
The crank length is often printed on the crank arm.
1 Rotate the pedals a few times in order to activate the Rally system.
2 Hold or MENU.
3 Select Settings > Sensors & Accessories > Power.
4 Select your sensor.
5 Select Crank Length.
6 Enter the crank length, and select .
Appendix
Registering Your Rally System
Help us better support you by completing our online registration today.
• Go to the Garmin Connect app.
• Keep the original sales receipt, or a photocopy, in a safe place.
Upgrading Your Rally 100 to a Dual Sensing System
Before you install the new right pedal, the left pedal must be paired and connected to a compatible Edge device
or the Garmin Connect app.
1 Review the Rally installation instructions (Installing the Rally Components, page 1).
2 Remove the existing right pedal.
3 Install the new right pedal (Installing the Pedals, page 2).
4 Rotate the crank arm.
5 Select an option to connect the right pedal to the left pedal:
• From your compatible Edge device, select > Sensors, select your sensor, select Sensor Details > Pair
Right Power Sensor, and enter the sensor ID found on the pedal.
• From the Garmin Connect app device settings, enable the Right Pedal, and enter the sensor ID found on
the pedal.
Appendix 17