User Manual
Table Of Contents
- Table of Contents
- Introduction
- Training
- Ride Data
- Device Information
- Other Compatible Devices
- Appendix
7 Move your bike chain to the largest chain ring and the smallest cassette gear.
8 Rotate the crank arm to check for clearance.
Garmin recommends 2 mm or more between the pedal and the chain.
9 If the pedal rubs the chain, add one washer (included) between the spindle and the crank arm to increase
clearance.
To maintain an equal q factor, you can add one washer to the left pedal spindle.
WARNING
Do not add more than one washer to each pedal. Doing so could increase the stress on the pedal spindle and
spindle threads causing possible damage to the pedals or bike or a possible crash leading to property
damage or serious personal injury.
NOTICE
Do not install pedal extenders. Doing so could damage the electronics in the pedals, causing the pedals to
not function.
Introduction 3