User Manual

Introduction
WARNING
See the Important Safety and Product Information guide in the product box for product warnings and other
important information.
Read all instructions carefully before installing and using the Rally system. Improper installation or use could
result in property damage or serious personal injury.
NOTICE
Go to www.support.garmin.com for the latest information including bike compatibility, software updates, and
video tutorials.
Thank You
Thank you for your Rally 200 or Rally 100 purchase. This manual covers all Rally systems.
Rally was designed for cyclists, by cyclists, to provide an outstanding experience of owning a precision power
measurement system for your bike.
Rally is simple, accurate, and easy to use.
Now it's time to put the power under your feet and get out there and ride.
Getting Started
1 Install the Rally components (Installing the Rally Components, page 1).
2 Install the shoe cleats (Shoe Cleats, page 5).
3 Pair the pedals with a compatible device (Pairing Rally with Your Edge
®
830 or Edge 1030, page 8).
4 Go for a ride (Your First Ride, page 8).
5 View your ride data (Ride Data, page 10).
6 Send your ride data to your Garmin Connect
™
account (Sending Your Ride to Garmin Connect, page 10).
Tools Needed
• 15 mm pedal wrench
• Bike grease
• 3 mm hex key
• 4 mm hex key
Installing the Rally Components
This manual covers all Rally systems. The installation steps for the Rally 200 and Rally 100 systems are very
similar. Steps that are specific to the Rally 100 system are noted. This manual also provides tips that are
specific to the Rally XC system.
Preparing for the Installation
1 Remove the existing pedals.
2 Clean the threads, and remove old grease.
Introduction 1