User Manual

Pairing Rally with Your Edge
®
830 or Edge 1030
Before you can view Rally data on the Edge device, you must pair the devices.
Pairing is the connecting of ANT+
®
or Bluetooth
®
wireless sensors. This procedure contains instructions for the
Edge 830 or 1030 devices. If you have another compatible device, see Other Compatible Devices, page 15, or
go to www.support.garmin.com.
1 Bring the Edge device within 3 m (10 ft.) of the sensor.
NOTE: Stay 10 m (33 ft.) away from other riders' sensors while pairing.
2 Turn on the Edge device.
3 Select > Sensors > Add Sensor > Power.
4 Rotate the pedals a few times in order to activate the Rally system.
5 Select your sensor.
6 Select Add.
When the sensor is paired with your device, is solid. You can customize the data fields to display power
data (Customizing the Data Fields, page 8). You can customize the Rally settings and receive software
updates (Updating the Rally Software Using the Edge 130, 530, 830, or 1030, page 21).
Your First Ride
Before you ride with Rally for the first time, you must enter the crank length on your compatible Edge device.
You must also enter the crank length when you move the Rally pedals to a bike that has a different crank length.
This procedure contains instructions for the Edge 830 or 1030 devices. If you have another compatible device,
see Other Compatible Devices, page 15, or go to www.support.garmin.com.
Entering the Crank Length
The crank length is often printed on the crank arm. This procedure contains instructions for the Edge 830 or
1030 devices. If you have another compatible device, see Other Compatible Devices, page 15, or go to
www.support.garmin.com.
1 Rotate the pedals a few times in order to activate the Rally system.
2 Select > Sensors.
3 Select your sensor.
4 Select Sensor Details > Crank Length.
5 Enter the crank length, and select .
Customizing the Data Fields
This procedure contains instructions for the Edge 830 and 1030 devices. If you have another compatible device,
see your owner's manual.
1 Hold a data field to change it.
2 Select a category.
3 Select a data field.
Training
Pedal-Based Power
Rally measures pedal-based power.
Rally measures the force you apply a few hundred times every second. Rally also measures your cadence or
rotational pedaling speed. By measuring the force, the direction of force, the rotation of the crank arm, and time,
Rally can determine power (watts). Because Rally independently measures left and right leg power, it reports
your left-right power balance.
NOTE: The Rally 100 system does not provide left-right power balance.
8 Training