NEO MOTION PLATES Owner’s Manual
© 2022 Garmin Ltd. or its subsidiaries All rights reserved. Under the copyright laws, this manual may not be copied, in whole or in part, without the written consent of Garmin. Garmin reserves the right to change or improve its products and to make changes in the content of this manual without obligation to notify any person or organization of such changes or improvements. Go to www.garmin.com for current updates and supplemental information concerning the use of this product.
Table of Contents Important Safety and Product Information...................................... 1 Device Information...........................
Important Safety and Product Information WARNING • Failure to heed the following warnings could result in death, serious injury, or property damage. • See the Important Safety and Product Information guide in the Tacx NEO product box for product warnings and other important information. • Use the NEO Motion Plates accessory with your Tacx NEO trainer on a flat surface that is clear of any obstructions. • The NEO Motion Plates accessory contains magnets.
Installing the NEO Motion Plates You can use the NEO Motion Plates accessory with any Tacx NEO trainer. 1 Remove the 4 feet from the Tacx NEO trainer. 2 Store the feet on the NEO Motion Plates.
3 Lift the left side of the Tacx NEO trainer, and align the left plate.
4 Lift the right side of the Tacx NEO trainer, and align the right plate. 5 Check the alignment of the plates on both sides. You may need to lift and adjust each side to align the plates correctly. NOTE: Both plates must be fully seated.
Important Safety and Product Information 5
Positioning the Front Wheel Support Before you can position the front wheel support, you must install the NEO Motion Plates (Installing the NEO Motion Plates, page 2). The front wheel support raises the front wheel of the bike for a natural cycling position and increased stability. The maximum tire width is 28 mm. 1 Use the front wheel support included with the NEO Motion Plates accessory instead of the front wheel support included with your Tacx NEO device.
3 Sit on the trainer, and pedal a few times. 4 If necessary, adjust the placement of the front wheel support. Device Information Training Tips Using the NEO Motion Plates accessory with your Tacx NEO trainer provides natural movement during your training rides. • The device is designed for normal cycling. For best results, avoid sprinting. • If you feel motion sickness while riding, try these options: ◦ Focus your vision on a point in front of the trainer. ◦ Watch a training video while riding.
Tacx Training App You can download the Tacx Training app to your compatible smartphone, tablet, or computer. • Sync your indoor training data with your Garmin Connect™ account. • Ride exciting courses without leaving your home. • Create your own rides, workouts, and more. • Calibrate your training, customize the default settings, and diagnose issues. • Update your trainer software.
support.garmin.
