Owner's Manual

• Make sure you have a running dynamics
accessory, such as the HRM-Pro
accessory.
• Make sure your Garmin device supports
running dyn~mics.
For more information, go to
www.garmin.com/runningdynamics.
• Pair the running dynamics accessory
with your Garmin device again,
according to the instructions.
• Make sure you are paired using ANT+,
rather than Bluetooth.
• If the running dynamics data display
shows only zeros, make sure the
accessory is worn right-side up.
NOTE: Ground contact time and
balance appears only while running. It is
not calculated while walking.
Replacing the Heart Rate Monitor Battery
1 Remove the sleeve G) from the heart
rate monitor module.
2 Use a small Phillips (00) screwdriver to
remove the four screws on the front of
the module.
3 Remove the cover and battery.
© 'Ciiiiiiiiiiii~
Quick Start Manual 11