Owner's Manual

The loop @ and hook@ connection
should be on your right side.
4 Wrap the heart rate monitor around your
chest, and connect the strap hook to the
loop.
NOTE: Make sure the care tag does not
fold over.
After you put on the heart rate monitor. it is
active and sending data.
Pairing and Setup
Pairing the Heart Rate Monitor with Your
ANT+ • Device
Before you can pair the heart rate monitor
with your device, you must put on the heart
rate monitor.
Pairing is the connecting of ANT+ wireless
sensors, like your heart rate monitor, with a
Garmin ANT+ compatible device.
NOTE: The pairing instructions differ for
each Garmin compatible device. See your
owner's manual.
• For most Garmin compatible devices,
bring the device within 3 m of the heart
rate monitor and use the device menu to
pair manually.
• For some Garmin compatible devices,
bring the device within 1 cm of the heart
rate monitor to pair automatically.
TIP: Stay 10 m away from other ANT+
sensors while pairing.
After you pair the first time, your Garmin
compatible device automatically recognizes
Quick Start Manual
3