Owner's Manual

1 From the app store on your
smartphone, install and open the
Garmin Connect Mobile app.
2 Hold 6 to turn on the device.
The first time you turn on the device,
you will select the device language.
The next screen prompts you to pair
with your smartphone.
3 Follow the instructions in the app to
complete the pairing and setup
process.
After you pair successfully, a message
appears, and your device syncs
automatically with your smartphone.
Installing the Standard Mount
For the best GPS reception, position the
bike mount so the front of the device is
oriented toward the sky. You can install
the bike mount on the stem or the
handlebars.
1 Select a secure location to mount the
device where it does not interfere with
the safe operation of your bike.
2 Place the rubber disk CD on the back of
the bike mount.
The rubber tabs align with the back of
the bike mount so it stays in place.
Quick Start Manual
3 Place the bike mount on the bike stem.
4 Attach the bike mount securely using
the two bands @.
5 Align the tabs on the back of the
device with the bike mount notches @.
6 Press down slightly and turn the
device clockwise until it locks into
place.
Going for a Ride
If your device was packaged with an
ANT+ ~ sensor, they are already paired and
can be activated during initial setup.
3