User Manual

The total stopwatch time
Á
continues running.
5
Select START to stop both timers.
6
Select an option.
Setting Sunrise and Sunset Alerts
You can set the sunrise and sunset alerts to sound a specific
number of minutes or hours before the actual sunrise or sunset
occurs.
1
From the watch face, hold MENU.
2
Select Clock > Alerts.
3
Select an option:
• Select Til Sunset > Status > On.
• Select Til Sunrise > Status > On.
4
Select Time, and enter the time.
Syncing the Time with GPS
Each time you turn on the device and acquire satellites, the
device automatically detects your time zones and the current
time of day. You can also manually sync the time with GPS
when you change time zones, and to update for daylight saving
time.
1
From the watch face, hold MENU.
2
Select Clock > Sync With GPS.
3
Wait while the device locates satellites (Acquiring Satellite
Signals, page 29).
Navigation
Saving Your Location
You can save your current location to navigate back to it later.
1
Hold LIGHT.
2
Select .
3
Follow the on-screen instructions.
Editing Your Saved Locations
You can delete a saved location or edit its name, elevation, and
position information.
1
From the watch face, select START > Navigate > Saved
Locations.
2
Select a saved location.
3
Select an option to edit the location.
Deleting All Saved Locations
You can delete all of your saved locations at once.
From the watch face, select START > Navigate > Saved
Locations > Delete All.
Projecting a Waypoint
You can create a new location by projecting the distance and
bearing from your current location to a new location.
1
If necessary, select START > Add > Project Wpt. to add the
project waypoint app to the apps list.
2
Select Yes to add the app to your list of favorites.
3
From the watch face, select START > Project Wpt..
4
Select UP or DOWN to set the heading.
5
Select START.
6
Select DOWN to select a unit of measure.
7
Select UP to enter the distance.
8
Select START to save.
The projected waypoint is saved with a default name.
Navigating to a Destination
You can use your device to navigate to a destination or follow a
course.
1
From the watch face, select START > Navigate.
2
Select a category.
3
Respond to the on-screen prompts to choose a destination.
4
Select Go To.
Navigation information appears.
5
Select START to begin navigation.
Creating and Following a Course on Your
Device
1
From the watch face, select START > Navigate > Courses >
Create New.
2
Enter a name for the course, and select .
3
Select Add Location.
4
Select an option.
5
If necessary, repeat steps 3 and 4.
6
Select Done > Do Course.
Navigation information appears.
7
Select START to begin navigation.
Marking and Starting Navigation to a Man
Overboard Location
You can save a man overboard (MOB) location, and
automatically start navigation back to it.
TIP: You can customize the hold function of the keys to access
the MOB function (Customizing the Hot Keys, page 26).
From the watch face, select START > Navigate > Last MOB.
Navigation information appears.
Navigating with Sight 'N Go
You can point the device at an object in the distance, such as a
water tower, lock in the direction, and then navigate to the
object.
1
From the watch face, select START > Navigate > Sight 'N
Go.
2
Point the top of the watch at an object, and select START.
Navigation information appears.
3
Select START to begin navigation.
Navigating to Your Starting Point
You can navigate back to the starting point of your activity in a
straight line or along the path you traveled. This feature is
available only for activities that use GPS.
1
During an activity, select STOP > Back to Start.
2
Select an option:
• To navigate back to the starting point of your activity along
the path you traveled, select TracBack.
• To navigate back to the starting point of your activity in a
straight line, select Straight Line.
Navigation 17