Owner's Manual
Table Of Contents
- Owners Manual
- Reset
- Table of Contents
- Introduction
- The Varia Taillight and Your Edge 1000
- Device Information
- Troubleshooting
- Support and Updates
- The taillight disconnects from the Edge device
- The taillight disconnects from the Varia RDU Device
- The taillight is not responding
- The status LED turns red while charging
- Thermal Safety Shutdown
- Pairing the Taillight with the RDU Device
- Resetting the Device
- Replacement O-rings
- Getting More Information
- Index
- Instructions
- Warranty
2
Place
the
rubber
disk
CD
on
the
back
of
the
bike
mount.
The
rubber
tabs
align
with
the
back
of
the
bike
mount
so
it
stays
in
place.
3
Place
the
bike
mount
on
the
bike
stem.
4
Attach
the
bike
mount
securely
using
the
two
bands
@.
5
Align
the
tabs
on
the
back
of
the
device
with
the
bike
mount
notches
@.
6
Press
down
slightly
and
turn
the
device
clockwise
until
it
locks
into
place.
Instructions
7