Owner's Manual
Table Of Contents
- Owners Manual
- Reset
- Table of Contents
- Introduction
- The Varia Taillight and Your Edge 1000
- Device Information
- Troubleshooting
- Support and Updates
- The taillight disconnects from the Edge device
- The taillight disconnects from the Varia RDU Device
- The taillight is not responding
- The status LED turns red while charging
- Thermal Safety Shutdown
- Pairing the Taillight with the RDU Device
- Resetting the Device
- Replacement O-rings
- Getting More Information
- Index
- Instructions
- Warranty
The
taillight
LEOs
@
fill
horizontally
to
indicate
the
battery
level.
The
status
LED
®indicates
additional
device
information.
Varia
RTL
Status
LED
Solid
green
Flashing
red
Solid
red
I
The
device
is
charging.
Charging
is
complete.
The
battery
is
low.
An
error
occurred
while
charging.
The
device
is
uploading
a
software
update
from
I
Garmin
ExpresslM.
Installing
the
Varia
RDU
Device
NOTE:
If
you
do
not
have
a
Varia
RDU
device,
you
can
skip
this
task
and
use
a
compatible
Edge
device
(page
9).
You
can
install
the
device
on
the
stem
or
the
handlebars.
1
Select
a
secure
location
to
mount
the
device
where
it
does
not
interfere
with
the
safe
operation
of
your
bike.
6
Instructions