Owner's Manual

2 Select the dev i ce key to cycle through the
bike light intensity and pattern modes.
Taillight modes include smart mode , high,
medium , low , and flash . Headlight modes
include smart mode, overdrive , high ,
medium , low , and flash .
NOTE: Taillight medium and flash modes
are available on the Varia ™ TL 300 device
only. Headlight overdrive and flash modes
are available on the Varia HL 500 device
only.
3 Hold the device key for 2 seconds to turn
off the device.
The next time you turn on the device , it
enters the last-used operating mode.
Pairing Varia Bike Lights with Your
Edge 1000
Before you can pa ir the devices , you must
update the Edge software.
1 Bring the Edge device within range (3 m) of
the sensor .
NOTE: Stay 10m away from other ANT+ ®
bike lights while pairing.
2 Turn on the Edge device.
3 From the home screen , select >/< >
Sensors > Add Sensor > Varia.
4 Turn on the Varia device .
5 Select the Varia device key to enter smart
mode.
The status LED flashes blue .
6 Select your sensor.
8
In st ru c ti on s