Owner manual

Function Test RTCSmp Tabletop Temperature Controlled Hold-Line
14 Part # 4532289 Rev 2 (1/17/14)
When the knob is in an ON-Position and the display remains off, check:
• Is the induction unit connected to the power supply?
• Is the control knob in an ON-Position?
If the point blinks but the pan is not heated up, or the display shows the temperature without a blinking point:
• Are you using a suitable pan or dish? See section 6.1 Proper Induction Serving Pan.
• Is the pan placed in the center of the heating area? See section 6.2 Proper Placement of Serving Pan.
For further assistance, see chapter 10 Troubleshooting or call a Factory Authorized Service agency.