Owner's manual

Part # 4526026 Rev. 03 (06/12/14) Page 11

2. Install the left and right support brackets (part # 4523226

and 4523227) by re-inserting the 2 screws removed in

step 1 and one additional screw (on both sides of the

range).

DETAIL I

INSERTED

SCREWS

3. Slide the salamander down into the support brackets

installed in step 2, see  gure 1.

4. Once the salamander is in place, fasten it to the unit on

both sides of the range with the provided #14B x 5/8 hex

washer head tapping screws.

DETAIL I

PROVIDED

#14B x 5/8 HEX

WASHER HEAD

TAPPING SCREWS

INSTALLATION Continued

Installation Of A Salamander To A Range

NOTE: The back of the range must be easily accessible.

DETAIL

36" RANGE

Figure 1 – With area detail de ned for 36 inch range.

1. Remove screws from back of oven (on both sides of

range) as shown:

DETAIL I

REMOVE

2 SCREWS

(BOTH SIDES)

Model GFIR – ” Ranges

SAFETY

FIRST

USE PROPER

LIFTING TECHNIQUES