Manual

Instructions for: 12360 SERIES
FOLDING PONTOON LADDER
Write for GARELICK Phone: [phone]
A complete 644 2
ND
Street, PO Box 8 E-mail: [e-mail]
EEz-In Catalog St. Paul Park, Minnesota 55071 Website: www.garelick.com
04/10
12.620
Step 6: Attach the standoffs to one of the black steps.
Choose the step that best suits your application and
aligns with the pontoon accordingly to provide the
most support.
Step 6A: Punch holes into the black step by using the
1/4-20 screw provided in the hardware bag. Align the
screw with the hole on the bottom of the black step and
strike with a hammer to pierce a hole as shown.
Step 6B: Using the hole that was punched in step 6A
assemble the standoff to the step as shown.
Step 7: Attach the Velcro strap to one of the top
verticals to secure the bottom vertical section in the up
position when not in use.
Step 8: Product is now ready to be installed onto the
boat and ready to be used. Ensure all fasteners are
secure and tight.
PARTSLIST
Part
Number
Bagged
Parts Description QTY
08.878MTGBRKT,UCHANNEL 2
49.782STANDOFFHARDWAREBAG 1
 03.079
1/4‐20X11/2MACHINE
SCREW 2
 03.221 1/4‐20LOCKNUT 2
 10.001 WHITETIP 2
 50.012 STANDOFF 1
60.753TOPVERTICAL 2
60.754BOTTOMVERTICAL 2
60.755BLACKSTEP 3
60.758HDWBAG12360 1
 03.103 #10X2 SCREW 6
 03.221 1/4‐20LOCKNUT 8
 03.842
1/4‐20X15/8"MACHINE
SCREW 8
 06.1660 PINCHGUARD 2
 06.184 FLATBLACKPLUG 6
 49.205 STRAP,VELCRO 1
 50.124 HINGE 2
1/4-20 Screw and Locknut
Stand-off
Insert the strap through
itself into a loop as
shown.
Pull strap tight and wrap it around opposite
tube to secure ladder assembly together in
the up position.