Instructions / Assembly

8
IfThereis“NO”Airflow

Look for visual signs of a bird’s nest such as bird
droppings by exterior vent hood.
Also look for straw, leaves, twigs or anything else that is
not lint inside the end of the vent.

Ifthereisabird’snestorotherblockage,usethe
“BlockageRemovalTool”toremovetheblockage.
a) Be sure that the dryer, vacuum or blower is
turned OFF.
b) Attach the Blockage Removal Tool to one of
the flexible rods and insert into the vent, from
the exterior, by hand.
c) Add additional rods if necessary until you reach
the blockage.
d) Twist the rods in a clockwise direction while
pushing the rods & tool into the blockage.
e)
When yo
u have grabbed the
blockage, continue to twist the
rods clockwise while you pull
the blockage out of the vent.
f) Repeat this process until the
Blockage Tool can be pushed
freely past the problem area.
Step4
Step5