Instructions / Assembly

17
Addional Cleaning Methods
Using the dryer to blow the lint out while rotary brushing
The “Dryer Adapter” has a built-in guard to prevent the
rotang Auger Brush from entering the dryer thus
prevenng damage to the blower wheel within the
dryer.
a) Place the Dryer Adapter on the back of the dryer.
b) Connect the vent to the adapter and secure with duct
tape.
c) With the dryer running, go to the exterior and begin
rotary brushing from outside as described earlier.
Important: Be sure to remove the Dryer Adapter when
you have completed the cleaning as it will collect lint if
le in place during normal operaon of the dryer.
Note: Eye protecon & a respirator must be worn as the
loosened lint will be blown out toward you.
Method 1
Pic of Dryer Adapter Hook-
up from page 20 of current
manual
Pic of Dryer Adapter Hook-
up from page 20 of current
manual