Instructions / Assembly
15
Remove the tape or clip from the damper or re-install the
louvers if you have a louvered vent hood. Be careful not to
break the pins on the ends of the louvers.
Once the vent system is cleaned, connect the vent
to the back of the dryer using th
e pro
per material.
(Seefollowingsection)
Slide the dryer into place and plug the electrical cord into the outlet.
Turn the dryer on and then go to the exterior and check for
air flow. You should feel a higher volume of air coming out
of the vent hood.
Step14
Step15
Step16
Step17