Instructions / Assembly

13
CLEANINGFROMOUTSIDEWITHACORDLESSDRILL
6. Once you feel you have reached the end, go to the
interior, disconnect the vacuum or blower and look inside
the vent to see if the brush has reached the end.

If the brush is not visible, and you felt the brush binding up
when you were rotary cleaning, it may be necessary to
finish cleaning from the inside toward the outside.
RemovingtheRodsfromtheVent:
Method1:
1. Continue to spin the rods in a clockwise direction as
you pull the rods out of the vent.
2. Disconnect one rod at a time making sure not to
loosen the rods that are still inside the vent.
3. Attach the drill after disconnecting each rod to
continue spinning the rods as you remove.
Note: If you need to finish cleaning the vent from the
inside, count the number rods used so you can
estimate how far you have reached from the outside.
Step11(cont)
Step12