Cut Sheet

Voice • Data • Video
188
USA 800.624.4320 l fax [phone] l www.gardnerbender.com
CANADA 905.564.5749 l fax [phone]
Terminating into a Data Jack
Step 1
Strip back 2 inches of outer jacketing. Avoid damaging
or nicking the pairs. (Part #: GTPS-3200)
Step 2
Place the wires into the data jack based on the
color diagram printed on the wiring jack (T568B
is most common). Leave no more then
1
/2" of the
wire untwisted.
Step 3
Terminate the wires in the jack using a punch down tool,
making sure the cutting edge is on the outside of the jack.
For easy termination use GB
®
impact punchdown tool.
(Part #: PDT-3110)
Step 4
Test the connections by using a wiremap tester.
(Part #: TT64202)
2
4
3
1