SDS

Product Name: Wire Aide™ Wire Pulling Lubricant Revision Date: December 27, 2013
9. Physical and Chemical
9.1 Information of basic physical and chemical properties
Appearance:
Light yellow, viscous gel with no odor.
Odor threshold:
Not Available
pH:
6.5 to 8.0
Freezing point:
∼ 32°F (0°C)
Boiling point:
∼ 212°F (100°C)
Flash point:
None
Evaporation rate:
Not available
Flammability (solid, gas):
Product is not flammable
Upper/lower flammability or
explosive limits:
Does not apply
Vapor pressure:
18mm Hg @ 72°F (22°C)
Vapor density (Air = 1):
0.9 – 1.1
Specific gravity (H
2
O = 1):
1.0
Solubility in water:
Dilutes
Partition coefficient: n-
octanol/water:
Not available
Auto-ignition temperature:
Does not apply
Decomposition temperature:
Not available
Viscosity:
66,000 – 94,000 cps. @ 10 rpm.
9.2 Other Information
Volatiles (Weight %):
95%
VOC Content:
0 g/l
10. Stability and Reactivity
10.1 Reactivity:
No dangerous reaction known under conditions of normal use.
10.2 Chemical stability:
Stable
10.3 Possibility of hazardous reactions:
None known.
10.4 Conditions to avoid:
None known.
10.5 Incompatible materials :
Avoid materials that react with water.
10.6 Hazardous decomposition products:
Carbon dioxide, carbon monoxide.
Page 3 of 5