Specification

600 V max. building wiring
1000 V max. lighting fixtures/
luminaires & signs
Capacidad nominal de
600 V Máx. para cableado
en general, para equipos
de iluminación y letreros
eléctricos a 1000 V Máx.
Fil de bàtiment de 600 V
Max., appareillage électrique
et enseignes de 1000 V Max.
1 #10
1-3 #12
1-4 #14
1-6 #16
2-6 #18, #20 or #22
1 #10 w/1 #12
1 #10 w/1-2 #14
1 #10 w/1-3 #16
1 #10 w/1-4 #18
1 #12 w/1-3 #14
1 #12 w/1-4 #16
1 #12 w/1-5 #18
2 #12 w/1 #14
2 #12 w/1-2 #16
2 #12 w/1-3 #18
1 #14 w/1-4 #16
1 #14 w/1-5 #18
1 #14 w/1-3 #22 or #20
2 #14 w/1-3 #16
2 #14 w/1-4 #18
3 #14 w/1-2 #18 or #16
4 #14 w/1 #18 or #16
1 #16 w/1-5 #20 or #18
1 #16 w/1-4 #22
2 #16 w/1-4 #18
2 #16 w/1-3 #22 or #20
3 #16 w/1-3 #18
4 #16 w/1-2 #18
5 #16 w/1 #18
1 #18 w/1-4 #22 or #20
2 #18 w/1-3 #22 or #20
3 #18 w/1-2 #22 or #20
4 #18 w/1 #22 or #20
1 #20 w/1-3 #22
2 #20 w/1-2 #22
3 #20 w/1 #22
APPLICATION
Use #84™ WingGard™ twist-on wire connector in general purpose
applications of 2 or more copper wires and where wing are needed to aid
with installation torque.
SPECIFICATIONS
WireGard™ connectors shall feature wing type shell and steel inner spring
and be suitable for connecting copper wire from #22 to #10 AWG. Shell shall
have wings to aid with griping and installation torque. Spring shall be plated to
resist corrosion and have a square profile to provide secure contact with wires.
Connectors shall be rated for use with 600 V building wire / 1000 V lighting
applications plus be UL listed and CSA certified for applications up to 105 °C.
WingGard™ connectors must have few turns to meet required torque, meet
or exceed UL pull out and dielectric test requirements.
INSTALLATION INSTRUCTIONS
1. Strip wire 3/8" (9.5 mm). For 16 and 18 gauge stranded wires,
strip 1/2" (12.7 mm)
2. Pretwisting unnecessary. Hold stripped wires together with ends even.
(Lead stranded wires slightly).
3. Align any frayed strands or conductors.
4. Screw on connector; push wires firmly into connector when starting.
5. To be sold only with installation instructions.
! !
WARNING:
Shut off power before working on a circuit. Use
approved materials and conform to all electrical codes.
CONSTRUCTION
Shell: Polypropylene, Color - Yellow
Innerspring: Zinc plated, square profile steel wire
Temperature Rating: 105 °C (221 °F)
WIRE RANGE
#22 to #10 AWG Solid or Stranded conductors
Copper conductors only, 600 V max. building wire;
1000 V max. for lighting fixtures and luminaries/signs
REGULATORY APPROVALS
UL: List for pressure type wire connectors per UL 486C,
file number 61X5. UL94V-2 flame retardant.
WingGard™
Electrical Wire Connector
#84™ (Yellow)
Wire Connector
61X5
DATA SHEET / HOJA DE DATOS / FICHE TECHNIQUE
#84™ WingGard™
DS-0010
Gardner Bender l Milwaukee, WI 53209 l www.gardnerbender.com l Questions or Comments 800.624.4320
Made in China/Hecho en China/Fabriqué en Chine l ZX433
WIRE COMBINATIONS / COMBINACIONES
DE CABLE / COMBINAISONS DE CABLES
LISTED FOR USE WITH: COPPER TO COPPER
Temperature rating: 105 °C (221 °F) Listed as a
PRESSURE TYPE wire connector for the following
solid and/or stranded wire connections:
CLASIFICADO PARA USARSE CON:
COBRE A COBRE
Especificatión de temperatura: 105 °C (221 °F)
Clasificado como un conector de cable TIPO A
PRESION para uso con las siguientes conexiones
de cable macizo y/o trenzado:
POUR USAGE DE: CUIVRE A CUIVRE
Cote de température: 105 °C (221 °F) Connecteur
A PRESSION pour les combinaisons suivantes de
fils pleins et/ou à brins:
A B C D E
#84™
(in) 1-1/32 5/16 7/32 1/4 23/32
(mm) 26.2 7.9 5.6 6.4 18.3
DIMENSIONS