Specification

600 V max. building wiring
1000 V max. lighting fixtures/
luminaires & signs
Capacidad nominal de
600 V Máx. para cableado
en general, para equipos
de iluminación y letreros
eléctricos a 1000 V Máx.
Fil de bàtiment de 600 V
Max., appareillage électrique
et enseignes de 1000 V Max.
1 - 3 #10
4 #12 sol
1 - 3 #12
1 - 5 #14
1 - 6 #16
2 - 6 #18
2 - 6 #20
3 - 6 #22
1 #8 + 1 #12
1 #8 + 2 #14
1 #10 + 1 / 2 #12
1 #10 + 1 #12 + 2 #14
1 #10 + 1 / 2 #12 + 1 #14
1 #10 + 1 #12 + 4 #16
1 #10 / #12 + 1 #14 + 3 #16
1 #10 + 1 #12 + 1 / 2 #16
1 #10 / #12 + 1 / 2 #14 + 1 #16
2 #10 + 1 #12
1 #10 / #12 + 3 / 4 #14
1 / 2 #10 + 1 / 2 #14
1 #10 + 4 #16
1 #10 sol + 5 #16 sol
1 / 2 #10 / #12 + 3 #16
1 / 2 #10 + 1 / 2 #16
1 #10 + 4 #18
1 / 2 #10 + 1 - 3 #18
1 #12 + 2 #14 + 2 #16
1 / 2 #12 + 1 #14 + 2 #16
2 #12 + 3 #14
1 / 2 #12 + 2 #14
1 - 3 #12 + 1 #14 sol
1 / 2 #12 / #14 + 4 #16
1 - 3 #12 + 2 #16
1 - 4 #12 / #14 + 1 #16
1 / 2 #12 / #14 / #16 + 4 #18
1 - 3 #12 / #14 / #16 + 3 #18
1 - 4 #12 / #14 / #16 + 2 #18
1 - 4 #12 / #14 / #16 + 1 #18
1 #14 + 5 #16
1 - 3 #14 + 3 #16
1 - 4 #14 + 2 #16
1 #14 / #16 + 5 #18
1 / 2 #14 / #16 / #18 + 3 / 4 #20
1 - 3 #14 / #16 / #18 + 2 #20
1 - 4 #14 / #16 / #18 + 1 #20
1 / 2 #16 + 1 #20 + 1 #22
1 #16 + 1 #18 + 1 #22
1 / 2 #16 / #18 / #20 + 4 #22
1 - 3 #16 / #18 / #20 + 3 #22
1 - 4 #16 / #18 / #20 + 2 #22
1 - 5 #16 / #18 + 1 #22
2 - 5 #20 + 1 #22
APPLICATION
Use H1 Hex-Lok
®
twist-on wire connector in general purpose applications of
2 or more copper wires and where wings are needed to aid with installation
torque. H1 connectors also permit installation with a 5/16" hex type socket
wrench. Offset swept wings are included for added grip and installation torque.
SPECIFICATIONS
Hex-Lok
®
connectors shall feature wing type shell and steel inner spring and
be suitable for connecting copper wire from #22 to #10 AWG. Shell shall have
offset wings to aid with gripping and installation torque. H1 connectors shall
permit installation with a 5/16" hex socket wrench. Spring shall be plated to
resist corrosion and have a square profile to provide secure contact with wires.
Connectors shall be rated for use with 600 V building wire / 1000 V lighting
applications plus be UL listed and CSA certified for applications up to 105 °C.
Hex-Lok
®
connectors must have few turns to meet required torque, meet or
exceed UL pull out and dielectric test requirements.
INSTALLATION INSTRUCTIONS
1. Strip wire 7/16" (11.1 mm). For 16 gauge stranded wires, strip 1/2" (12.7 mm).
2. Pretwisting unnecessary. Hold stripped wires together with ends even.
(Lead stranded wires slightly).
3. Align any frayed strands or conductors.
4. Screw on connector; push wires firmly into connector when starting.
5. To be sold only with installation instructions.
! !
WARNING:
Shut off power before working on a circuit. Use
approved materials and conform to all electrical codes.
CONSTRUCTION
Shell: Polypropylene, Color - Tan
Innerspring: Zinc plated, square profile steel wire
Temperature Rating: 105 °C (221 °F)
WIRE RANGE
#22 to #10 AWG Solid or Stranded conductors
Copper conductors only, 600 V max. building wire;
1000 V max. for lighting fixtures and luminaries/signs
REGULATORY APPROVALS
UL: List for pressure type wire connectors per UL 486C,
file number 61X5. UL94V-2 flame retardant.
Hex-Lok
®
Multi-range Wire Connector
H1 (Tan)
Wire Connector
61X5
DATA SHEET / HOJA DE DATOS / FICHE TECHNIQUE
H1 Hex-Lok
®
DS-0014
Gardner Bender l Milwaukee, WI 53209 l www.gardnerbender.com l Questions or Comments 800.624.4320
Made in China/Hecho en China/Fabriqué en Chine l ZX437
WIRE COMBINATIONS / COMBINACIONES
DE CABLE / COMBINAISONS DE CABLES
LISTED FOR USE WITH: COPPER TO COPPER
Temperature rating: 105 °C (221 °F) Listed as a
PRESSURE TYPE wire connector for the following
solid and/or stranded wire connections:
CLASIFICADO PARA USARSE CON:
COBRE A COBRE
Especificatión de temperatura: 105 °C (221 °F)
Clasificado como un conector de cable TIPO A
PRESION para uso con las siguientes conexiones
de cable macizo y/o trenzado:
POUR USAGE DE: CUIVRE A CUIVRE
Cote de température: 105 °C (221 °F) Connecteur
A PRESSION pour les combinaisons suivantes de
fils pleins et/ou à brins:
D
C
B
A
E
F
A B C D E F
H1
(in) 47/64 9/16 5/16 21/61 1-5/32 5/16
(mm) 18.7 14.3 7.9 8.7 29.4 7.9
DIMENSIONS