Data Sheet

Setting up vole traps can be really difficult – if you do not have
the right tools. The Gardigo Vole Trap Accessory Set makes this
tedious task easier than ever before! Use the metal probe rod
to find the underground tunnels. Voles dig right underneath the
lawn surface to be able to feed on the roots of your plants. Where
the probe rod is easy to stick into the ground at first and then
harder to move, you have successfully found a tunnel. To be sure,
try to find the further course of the tunnel and mark it with the
flags. Then use the hole digging tool to make a hole into which
the Gardigo Vole Traps (Art.-No. 70072; available separately) will
fit precisely. This is important, as neither light nor air should get
into the tunnel at the gap between the trap and the earth. Other-
wise the vole may try to dig earth towards the trap, trying to fix
Art.-No.: 70044
Vole Trap Accessory Set
Find, mark & set traps
Additional information
• Dimensions:
Metal probe rod: 3.8 x 25.3 x 3.8 cm (W x H x D)
Hole digger: 12.9 x 28 x 6.7 cm (W x H x D)
Four flags: 6 x 25.7 x 0.6 cm (W x H x D)
• Packaging dimensions: 18,8 x 18,8 x 5,5 cm (W x H x D)
• Manuals included:
DE, GB, FR, ES, IT, NL
• Product images, scenery images
• Packaging unit: 16 pieces per unit
• EAN: 4260664811213
the hole in its tunnel. Working precisely with the hole digging tool
will also keep the damages to your lawn to a minimum. It is best
to fill the earth and punched out turf into a bucket.
After a successful catch, you can fill the hole again.