Use and Care Manual

OPERATION AND STORAGE
TO TURN ON THE FIRE PIT
2. Fully open LP cylinder valve.
gas lines before proceeding.
3. Push in gas control knob and turn counterclockwise to “IGNITER”(Figure b) to light the fire pit. If
a clicking sound).
then release control knob. If you want a lower temperature, push in the control knob and turn clockwise
TO TURN OFF THE FIRE PIT
2. Turn cylinder valve clockwise to OFF and disconnect regulator when fire pit is not in use.
LOW
HIGH
OFF
Figure a
LOW
HIGH
OFF
Figure b
LOW
HIGH
OFF
Figure c
OFF: the heater stop work
Storage
2. Remove the pressure controller and the hose.
gas dealer.
8