INSTRUCTION MANUAL Patio Wicker Swivel Rocking Chair IF YOU PURCHASED THE CHAIR ONLINE AND HAVE ANY QUESTIONS OR CONCERNS PLEASE CONTACT US WITH EMAIL OR TEXT EMAIL: hiwarrantyservice@outlook.
WARNING: Proper use of the chair is for single person seating only. The chair is not to be used for standing purposes and will not function as a stool or step-ladder. Use on even surfaces only. Chair tested for use at weight of 300lb (136.4kg). Improper use of this product or failure to use as directed may result in injury. Not intended for commercial use. IMPORTANT: Please read all the instructions and warnings before assembling.
A 1PC F D C B 1PC G K L 1PC I 1PC J M6*35 4PCS 14PCS M 1PC 18PCS N O 1PC Step 2: Secure right arm (A) to the other side of assembled chair back (C) with 2 washers (I) and 2 screws ( G) by using allen wrench (K). Do not fully tighen now. Note: The hole of chair arm must face inside of seat. A B I 8PCS 1PC 4PCS Step 1: Secure chair back (C) to left arm (B) with 2 washers (I) and 2 screws (G) by using allen wrench (K). Do not fully tighen now.
Step 5: Attach rocking base (E) to assembled sofa arms (A .B) with 4 nuts (J) and 4 screws (H) by using allen wrench (K) and spanner (L). Do not fully tighten all the screws. J L K E H Step 6: Attach swivel base (F) to rocking base (E) with 12 washers (I&M), 4 nuts (J) and 4 screws (H) by using allen wrench (K) and spanner (L). Verify the alignment and adjust and fully tighten all the screws. K F H I F I M J I J L E Step 7: Put seat and back cushion (N&O) onto chair and it is ready to use now.
