GB ® DK S NL F GARDENA Operating Instructions Water Computer F Mode d’emploi Programmateur d’arrosage NL Instructies voor gebruik Besproeiingscomputer S Bruksanvisning Bevattningscomputer DK Brugsanvisning Vandingscomputer RUS Инструкция по эксплуатации Компьютер для полива GB RUS C 1060 plus Art.
GB GARDENA Water Computer C 1060 plus Welcome to the Garden of GARDENA... Translation of the original instructions from German. Please read these operating instructions carefully and observe the notes given. Use these instructions to familiarise yourself with the Water Computer and its proper use as well as the notes on safety. For safety reasons, children and young people under 16 as well as anyone who is not familiar with these operating instructions may not use the Water Computer.
Warning ! The Water Computer must not be used indoors. v Only use the Water Computer outdoors. The max. temperature for the water flow is 40 °C. v Only use clear fresh water. The minimum operating pressure is 0,5 bar, the maximum operating pressure is 12 bar. The Water Computer may only be set up vertically with the sleeve nut to the top to prevent water penetrating into the battery compartment. Avoid tensile strain.
GB You can change the display level at any time, even during programming. All program data that has been changed up till now and confirmed by pressing OK will be saved. Display panel : 7 Display Desscription 5 Ticker Explanation of the program step / Computer status. 6 Weekdays (Mo), (Tu), ... Current weekday or programmed watering days. Time Flashes when entering the current data (Time - hours, minutes, day of the week). 8 am / pm Display for 12 hour clock (e. g. in USA, Canada).
GB 2 Bars 1 Bar 1 Bar flashing 0 Bar Battery half full Battery low Battery almost flat Battery flat Valve opens. Valve opens. Valve still opens. Valve does not open. The Water Computer is guaranteed to work for a minimum of 4 more weeks. The Water Computer will continue to work for no more than 4 weeks. The Water Computer stops working soon. The Water Computer stops working. It is advisable to change the battery. The battery must be changed soon. The battery must be changed.
GB Connect soil moisture or rain sensor (optional) : Apart from scheduled watering there is also the option of including how damp the soil is or rainfall into the watering programme. If the soil is damp enough, the programme will be stopped, or a programme will be prevented from starting. Manual operation via Man. On / Off is unaffected by this. The “Soil moisture sensor-controlled watering” mode can only be selected when using a soil moisture sensor (see 5.2 Special programs). F 1.
GB 5.
GB Entering watering program : Program-controlled watering (Prog 1 - 6) : Up to 6 programs can be entered using program-controlled watering (Prog 1 to 6 ). 1. 1. Press Menu-key twice (not necessary if the current time and day of the week has been entered). The ticker Select program no. appears. Prog and the program number flash on the screen. 2. Use the rotary button to set the program number (E.g. Prog 3 ) and confirm by pressing OK. The ticker Enter watering start time appears.
GB The watering frequency can be selected by : • the (7.) watering cycle (right hand column of the display) – or – • the (8.) watering days (left hand column of the display). 7. Select watering cycle with the rotary button (E.g. 2nd) and confirm by pressing OK. 24h / 2nd / 3rd / 4th / 5th / 6th / 7th : Watering every 24 hours / every 2. / 3. / 4. / 5. / 6. / 7. days The week preview is displayed in the left hand column for 2 seconds. 7. The ticker Select program no.
GB 5.2 Special programs Budget function / % run time (Prog 1 0 ) : The programmed watering durations of the 6 watering programs can be reduced centrally in 10 % stepos from 100 % down to 10 % without changing the 6 programs. E.g. watering durations in Autumn must be shorter than in Summer. 1. Keep Menu button pressed for 5 seconds. (with Prog 1 1 “Automatic water distributor”, press Menu button twice). Prog and the program number flash on the screen.
GB The watering frequency entered for the first watering program applies by design to watering programs 2 - 6 too. 1. Hold the Menu button down for 5 seconds. Prog and the program number flash on the screen. 2. 2. Select program no. 1 1 with the knob and confirm with OK. The ticker Enter watering start time appears. Start and the hour display will flash on the screen. 3. Set the watering start time (E.g. 1 8 . 0 0 ) and watering duration. (E.g.
GB Soil moisture sensor-controlled watering (Prog 12 - 14) : Condition : the GARDENA Soil Moisture Sensor Art. 1188 is connected (siehe 4. Inbetriebnahme). The previously set programs for program-controlled watering (Prog 1 to 6 are retained but they do not run. 1. Hold the Menu button down for 5 seconds. Prog and the program number flash on the screen. 2. Select the required watering cycle by turning the knob (e.g. Prog 1 2 ) and confirm by pressing OK. 2. Prog 1 2 Watering throughout the day (6a.
GB 5.3 Other settings : Read / modify watering programmes : If a value in the programme is to be changed, this can be changed without changing the other values in the programme. 1. Press the Menu key twice. Start and the hours flash on the display. 2. Press the Menu button to jump to the next programme level – or – change the programme data with the rotary button and confirm by pressing the OK button. If the watering period is changed while a programme is running , the current watering is ended.
GB Reset : The factory settings are restored. v Press Man.-key and Menu-key simultaneously for 3 seconds. All the LCD symbols are displayed for 2 seconds and the display moves to the normal display. • All the program data are set to zero. • The manual watering period is set to 0 : 30 again. • The language, the time and the day of the week are retained. Important information : If no entry is made during programming for a period of more than 60 seconds, the normal display reappears.
GB 8. Troubleshooting Fault Possible Cause Remedy No display appears Battery inserted incorrectly. v Check polarity markings match (+ / –). Flat battery. v Insert new (alkaline) battery. Temperature on the display is higher than 60 °C. Display appears after temperature has dropped. Manual watering is not possible using the Man. button Battery flat (1 bar flashes). v Insert new (alkaline) battery. Manual watering period is set to 0 : 0 0 .
GB GARDENA Adapter cable (to connect older GARDENA sensors) Art. No. 1189-00.600.45 From GARDENA Service GARDENA Cable Adapter For simultaneous connection of rain and soil moisture sensor Art. No. 1189-00.630.00 From GARDENA Service GARDENA Automatic Water Distributor For fully controll of up to 6 watering lines Art. No. 1198 10.Technical Data Min. / max. operating pressure : 0.5 bar / 12 bar Flow medium : Clear fresh water Max.
G Product Liability We expressly point out that, in accordance with product liability law, we are not liable for any damage caused by our units if it is due to improper repair or if parts exchanged are not original GARDENA parts or parts approved by us, and, if the repairs were not carried out by a GARDENA Service Centre or an authorised specialist. The same applies to spare parts and accessories.
G EU Certificate of Conformity F Certificat de conformité aux directives européennes The undersigned GARDENA International GmbH, Hans-Lorenser-Str. 40, D-89079 Ulm, hereby certifies that, when leaving our factory, the units indicated below are in accordance with the harmonised EU guidelines, EU standards of safety and product specific standards. This certificate becomes void if the units are modified without our approval. Le constructeur, soussigné : GARDENA Manufacturing GmbH, Hans-LorenserStr.
96 Bewässerungsplan
Deutschland / Germany GARDENA Manufacturing GmbH Service Center Hans-Lorenser-Straße 40 D-89079 Ulm Produktfragen: (+ 49) 731 490 - 123 Reparaturen: (+ 49) 731 490 - 290 service@gardena.com Argentina Argensem ® S.A. Calle Colonia Japonesa s / n (1625) Loma Verde Escobar, Buenos Aires Phone: (+ 54) 34 88 49 40 40 info@argensem.com.ar Australia Nylex Consumer Products 50 -70 Stanley Drive Somerton, Victoria, 3062 Phone: (+ 61) 1800 658 276 spare.parts@nylex.com.au Austria / Österreich GARDENA Österreich Ges.
