User manual Water Control

Manual operation by

Water Control:

The valve can be opened or closed manually at any time (Only during

the pairing process is no manual irrigation possible). A program-

controlled open valve can also be closed early without changing the

program data.

1. Press Man.-button to open the valve manually (or to close an

open valve).

The LED Active Watering

is lighting green for 10 sec.

2. Press Man.-button to close the valve early.

If the Water Control is in “Sleep Mode”, press the Man.-button

2 times.

The watering duration (0 to 59 min.) is according to the parameter

of the GARDENA smart App.

If a program-controlled watering has been stopped manually,

this program-controlled watering cannot start again.

If the valve has been opened manually and a programmed start

of a watering period overlaps the manual opening period, the pro-

grammed starting time is suppressed.

Example:

The valve is opened at 9.00 a.m. manually, the opening period is

30 minutes. A program with a start time (START) between 9.00 and

9.30 a.m. will not be undertaken in this case.

5. MAINTENANCE

To clean the filter:

The filter

should be checked regularly and cleaned when

necessary.

1. Unscrew sleeve nut

of the Water Control by hand from the

tap thread (do not use pliers).

2. If necessary unscrew the adaptor

3. Remove filter

from sleeve nut

and clean.

4. Fit the Water Control again (see 3. INITIAL OPERATION

“To connect the Water Control” ).

To clean Water Control: No caustic / abrasive cleaning agents should be used.

v Clean Water Control with a damp cloth (do not use solvent).

6. STORAGE

To put into storage: The unit must be stowed away from children.

1. To preserve the batteries, these should be removed

(see 3. INITIAL OPERATION).

2. Stow the Water Control in a dry area where it has protection from

frost.