User manual Water Control

3. INITIAL OPERATION
To insert batteries: The batteries are not included in the scope of delivery.
The Water Control must only be operated with 3 x alkalimanganese
(alkaline) batteries type LR6 (AA) (Mignon).
Under normal conditions of use, the service life is six months
(2 x app query per day).
CAUTION!
Rechargeable batteries should not be used!
6
5
7
ß
P
1. Press the tab
5
and open the cover
6
.
2. Remove the battery holder
7
.
3. Insert batteries into the battery holder
7
. In doing so, ensure
that the polarity
ß
P
is correct.
4. Push the battery holder
7
back into the battery compartment.
5. Close the cover
6
.
To connect the Water Control:
8
9
0
The Water Control is fitted with a sleeve nut
9
for taps with (G 1" )
(33.3 mm) thread. The adaptor supplied
8
allows the Water Control
to be connected to taps with a (G 3/4") (26.5 mm) thread.
1. For tap with a G 3/4" (26.5 mm) thread:
Screw adaptor
8
on to the tap manually (do not use pliers).
2. Screw sleeve nut
9
of the Water Control on to the adaptor thread
by hand (do not use pliers).
3. Screw tap connector
0
on to the Water Control.
12
GB