Installation Guide

Material: HDPE (Hi Density Polyethylene) (Hard PE)
Due to its greater material density, HDPE is more corrosion-resistant and
keeps its shape better in the face of heat and pressure load.
Wall thickness approx. 1.8 mm. Max. pressure 6 bar. Max. water temperature
40°C. Inside diameter: 21.4 mm. Outside diameter: 25 mm. Laying depth: 20–
25 cm (spade’s depth)
Can a GARDENA Micro-Drip System be combined with the sprinkler
system?
No, micro-drip systems and sprinkler systems must not be operated
simultaneously on a single line or at the same time using a single line,
otherwise neither system will function properly due to the different nozzle
sizes and cross-sections. These two systems must be operated separately,
i.e. one after the other.
Can the automatic water distributor be installed underground too?
In principle, yes. However, there is no standard box and it is also important to
ensure that the distributor can be removed over the winter months.
Can the automatic water distributor also be mounted vertically, e.g. on
the wall?
No, it must be mounted as shown on the packaging – lying down, i.e.
horizontal.
How many sprinklers can be connected at the same time in series?
There is no general answer to this, as the number of sprinklers operating
simultaneously from a single tap depends on the available water pressure and
the water volume of the tap as well as on the length and cross-section of the
hose.